COOL Long 3800
6:1 for 2-3 Lipos geared all ball bearings. Up to 40 oz of thrust
at only 26 A draw comes complete with 4mm shaft geardrive. Use 8x4.7
to 10x4.7 props. Stick mount Reg. $ 79. Cooling fin body
$59.00
23711
COOL Short 5400 5:1
2-3 Lipos 8x4.3 to 10x4.7 (2 cells). Thrust 25 oz at 11 A 66
g light. Smooth ballbearings. Stick mount. Reg $ 69 Cooling fin body
$49.00
23712
COOL S 4200 5:1 geared
8x4.7 (3Lipos) or 11x4.7 (2 Lipos) up to 30 oz thrust. Hover at 5.5
A.Rec. ESC 20 A Reg.$ 69
$49.00
23709
TORNADO 400F Fast
revving Outrunner for 6x4 to 7x4 (2-3Lipos) for fast flying Aerobatic
or powerful speed 400 replacement. 2250 kuv
$49.00
23708
TORNADO 400T High
torque Outrunner for 9x4.7 props 2- 3 Lipos. 19oz of thrust at only
10 A
$49.00
23710
TORNADO 400H Fast
revving Outrunner especially designed for Helis like the Shogun. Low
Ampdraw and very efficient
$49.00
23714
MAXI 09 Outrunner Fast
revving Outrunner Similar to the AXI design but has more power and
better precision (and better price too) Can be reversed and
backmounted with reasonably priced backmount and propeller adapter
(15.95) Can swing large propellers up to 35 oz thrust
$49.00
23715
MAXI 12 OUTRUNNER
Very efficient for large propellers in direct drive. Sounds like a
turbine. 2/3 Lipos and 9x4.7-10x4.7 props awesome thrust and long
life. Backmount available
$49.00
23716
MAXI 16 OUTRUNNER for
large propellers up to 11x4.7 with 2 Lipos or 10x4.7 with 3 cells.
Very efficient power house. Btter performance than the AXI motors
$49.00
23724
MAXI/AXI Rear motor
mount with propeller adapter seen for $ 24.95
$15.95
23718
MAXI AXI Motor mount
plate aluminum only (front mount)
$6.95
23719
DYMOND geardrive all ball
bearing for 20 mm motors. 4 gear ratios and clamp cone adapter for
the 3 mm shaft included 3.75-4.4-5.3-6.6 gear ratios
$22.00
23593
DYMOND 18 A brushless speed
controller with heatsink and selectable low voltage cutoff for 2-3
cell Lipos Reg. $ 59
$39.00
22156
TYPHOON lightweight aluminum
stick motor mount. Comes with 3 Nylon screws to safely mount 5/6 Typhoon
motors
$5.95
22157
Aluminum motormount for
400/480 AXI/TORNADO/ TYPHOON 06 to 15 Outrunners. Universal bolt pattern
and 3 Nylon screws M3 supplied. Heavy duty stick mount.
$5.95
23705
TYPHOON 05 3D Outrunner
motor for 9x4.7 (2 Lipos) 8x3.8 (3 Lipos) direct drive 7-8 cells
lighter and smaller than the 6 /3D 31g (28 g = 1 oz) 3.2 mm shaft
(without stickmount pictured)
$49.00
NEW
23705
TYPHOON 06 3D Popular
Outrunner motor for 9x4.7 (2 Lipos) 8x3.8 (3 Lipos) direct drive
7-8 cells 3.2 mm shaft. Ideal for Shock fliers
$49.00
23700
TYPHOON 06 Outrunner for
8x3.8 (2Lipos) or 6x4 3 Lipos direct drive 7-8 cells. Beefy 3.2 mm
shaft .High revving for 400 size Cap, Extra 300 and similar
$49.00
23701
TYPHOON 15 Outrunner
for 9x6 to 11x4.7 props direct drive 7-8 cells. Awesome power
to replace 480 motors. 3.2 mm shaft Reg $ 69. Powerful for 3
D or 2-3 lbs Trainers
$59.00
23702
TYPHOON 06 Outrunner
Combo with 15 A brushless controller. A $ 99 value
$79.00
23703
TYPHOON 06 3D
Outrunner Combo with 15 A brushless controller
$79.00
23605
PJS 300 POWER OUTRUNNER
Motor for large props 9x4.7
$69.00
23606
PJS 500 POWER OUTRUNNER
Motor for large props 9x6
$74.00
23607
PJS 550 POWER OUTRUNNER
Motor for large props 10x4.7 new protective backplate
$79.00
23608
PJS 550 R POWER OUTRUNNER
Motor small diameter awesome power
$79.00
23609
PJS 800 POWER OUTRUNNER
Motor for large props 10x4.7
$85.00
23610
PJS 1000 POWER OUTRUNNER
Motor replaces 480 Cobalt geared for large props 11x4.7 or 9x6